Detail SUBERSIBLE TURBIN PUMP 2HP MEREK FE PETRO
Power Requirements
> 1-1/ 2 hp Fixed Speed models require single phase, 208-230 VAC, 60 Hertz incoming power
> 1-1/ 2 hp Fixed Speed models incorporate a starting & running capacitor, with internal bleed resistor, rated 370 Volt, 15 microfarad
> STP-SCI Single Phase Smart Controllers and STP-CBS Single Phase Control Boxes are available for 1 1/ 2 hp pump control
> Max Motor Draw: 11 amps
Pump Motor
> 1-1/ 2 hp Fixed Speed, 3450 rpm, multi-stage centrifugal type pump motor with integral, automatic, thermal overload protection
> Available in Standard Pressure ( 2 stage) model, Max Flow = 100 gpm, Max Pressure = 34 psi
> Available in High Pressure ( H150, 3 stage) model, Max Flow = 65 gpm, Max Pressure = 46 psi
> Max liquid viscosity: 70 SSU @ 60° F ( 15° C)
> Standard STP ( Non-AG) models are UL and cUL listed for fuel mixtures containing up to 10% Ethanol or Methanol, and 20% MTBE, 20% ETBE, or 17% TAME with gasoline.
> STPAG ( Alcohol-Gasoline) models are UL and cUL listed for fuel mixtures containing up to 85% Ethanol or Methanol, and 20% MTBE, 20% ETBE, or 17% TAME with gasoline.
> 1-1/ 2hp Fixed Speed models can also be used with Diesel Fuels, Fuel Oils, Kerosene, Avgas, and Jet Fuels in a non-gelled pourable state.
> All wetted elastomers are made of a high grade, fluorocarbon viton compound.
Standard Features
> 1-1/ 2 hp Fixed Speed models are available in Variable Length and Fixed Length options
> Check Valve: 2 3/ 4 diameter fluorocarbon viton seal constructed on cast aluminum body and steel backing washer
> Pressure Relief Valve: available in four pressure relief settings, integral to Check Valve. Standard Model relieves at 40 psi and resets above 35 psi.
> Syphon: venturi type syphon primer supplied with every submersible. Syphon Check Valve and Secondary Syphon sold separately.
> Air Eliminator: every submersible includes tank return path, with one-way check valve, to provide active air elimination
> Electrical Disconnect: electrical yoke for positive contractor disconnect during service
Approvals
> 1 1/ 2 hp Fixed Speed models are UL and cUL listed
> Consult factory for other applicable approvals
Quality Certification
> Franklin Fueling Systems is an ISO 9001 Certified Manufacturer
Ordering Information
1-1/ 2 hp Fixed Speed, Variable Length Submersible Turbines Pumps
Non-AG Model Number
Description
Model* Length Range
STP 150 - VL1 1 1/ 2 hp Fixed Speed 60” -88”
STP 150 - VL2 1 1/ 2 hp Fixed Speed 91” -152”
STP 150 - VL3 1 1/ 2 hp Fixed Speed 123” -214”
STP H 150 - VL1 High Pressure, 1 1/ 2 hp Fixed Speed 61” -89”
STP H 150 - VL2 High Pressure, 1 1/ 2 hp Fixed Speed 92” -152”
STP H 150 - VL3 High Pressure, 1 1/ 2 hp Fixed Speed 124” -215”
Alcohol-Gasoline Model Number
Description
Model* Length Range
STPAG 150 - VL1 AG, 1 1/ 2 hp Fixed Speed 60” -88”
STPAG 150 - VL2 AG, 1 1/ 2 hp Fixed Speed 91” -152”
STPAG 150 - VL3 AG, 1 1/ 2 hp Fixed Speed 123” -214”
STPAG H 150 - VL1 AG, High Pressure, 1 1/ 2 hp Fixed Speed 61” -89”
STPAG H 150 - VL2 AG, High Pressure, 1 1/ 2 hp Fixed Speed 92” -152”
STPAG H 150 - VL3 AG, High Pressure, 1 1/ 2 hp Fixed Speed 124” -215”
1. Above models are UL and cUL listed for compatibility with fuel mixtures containing:
STP ( Non-AG) = up to 15% Ethanol or Methanol with Gasoline, and 20% MTBE, 20% ETBE, or 17% TAME with Gasoline.
STPAG ( Alcohol-Gasoline) = up to 100% Ethanol or Methanol with Gasoline, and 20% MTBE, 20% ETBE,
or 17% TAME with Gasoline.
2. All models are supplied with Standard Check Valve unless factory option “ R” or “ W” is specified.
3. All above models require Single Phase, 208-230 VAC, 60 Hertz incoming power
* Model Length ( B) defined as the dimension from Turbine Manifold bottom to Pump Motor inlet.
* * 4” Riser Pipe, if supplied locally, must be 4 1/ 2” OD by 3/ 16” wall thickness tubing.
* * * For Riser Pipe lengths 31” to 69” , adder charge applies.
Factory Installed Options ( specified in Model Number at time of STP order)
Model Designation
Description
F Floating Suction Adapter ( 1 1/ 2” NPT Female) must be factory installed
K IFS ( Intake Filter Screen) factory assemblied to Pump Motor Assembly
R Model R Check Valve factory installed ( for Veeder Root PLLD Line Leak)
W Model W Check Valve factory installed ( for Red Jacket PPM4000 Line Leak)
Field Installed Options ( 1-1/ 2 hp Fixed Speed specific accessories)
Part Number
Description
5800100215
Single Phase Smart Controller ( when purchased without a 4 inch STP)
5800100215
Single Phase Smart Controller ( when purchased with a 4 inch STP) *
5800300100
STP-SCI ( Dispenser Hook Isolation for 110V dispenser handle switches, up to 8 each)
402312921
STP-DHI-SCI ( combo Dispenser Hook Isolation with factory wired STP-SCI) *
402313921
STP-DHI-CBS ( combo Dispenser Hook Isolation with factory wired STP-CBS)
400818921
STP-CBS ( Single Phase Control Box with lockout switch, 110V coil)
400137908
Syphon Check Valve ( Alcohol-Gasoline compatible) when ordered with STP
402507930
Secondary Syphon Kit ( when two syphon primes are required for one STP)
402459931
Model 65 PSI Check Valve ( for Slave of manifolded STP’ s with Veeder Root PLLD)
Tampilkan Lebih Banyak