Detail ECO VFC Merek FE Petro
Power RequirementsIST models can only be powered by a EcoVFC™ controller: 2 hp models can operate with single-phase incoming power supply to the EcoVFC™ .2 hp and 4 hp models operate with three-phase incoming power supply to the EcoVFC™ for proper operation.Incoming power supply is 360-440 VAC, 50 Hz for the EcoVFC™ . EcoVFC™ outputs a three-phase, variable frequency signal, valid for FE Petro variable speed pumps only.2 hp max. motor draw: 9 Amps.4 hp max. motor draw: 15 Amps.EcoVFC™ max. line draw: 20 Amps.Pump Motor2 hp or 4 hp, variable speed, two-stage centrifugal type pump motor with integral, automatic, thermal overload protection.Max. flow: 2 hp = 110 gpm, 4 hp = 140 gpm.Max. pressure: selectable operating pressure on MagVFC™ between 24 psi and 42 psi deadhead.Available with MagShell™ , which results in 45% increased flow area around motor.Liquid CompatibilityMax. liquid viscosity: 70 SSU at 60 ° F ( 15 ° C) .IST models imply alcohol-gasoline compatibility for fuel mixtures containing diesel fuel with up to 20% biodiesel, 100% biodiesel, up to 85% ethenol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.IST models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state.All wetted elastomers are made of a high grade, fluorocarbon compound.Standard FeaturesAll IST models include variable speed, variable length options and alcohol-gasoline compatibility.Check valve: 70mm diameter fluorocarbon seal constructed on cast aluminum body and steel backing washer.Pressure relief valve: available in four pressure relief settings, integral to check valve. Standard model relieves at 40 psi and resets above 35 psi.Syphon: venturi-type syphon primer supplied with every submersible. Syphon check valve and secondary syphon sold separately.Air eliminator: every submersible includes tank return path with one-way check valve to provide active air elimination.Electrical disconnect: electrical yoke for positive contractor disconnect during service.ApprovalsConsult factory for applicable approvals.Quality CertificationFranklin Fueling Systems is an ISO 9001 Certified Manufacturer.
Tampilkan Lebih Banyak